• Wet Gas Flowmeter for Laboratory Room
  • Wet Gas Flowmeter for Laboratory Room
  • Wet Gas Flowmeter for Laboratory Room
  • Wet Gas Flowmeter for Laboratory Room
  • Wet Gas Flowmeter for Laboratory Room
  • Wet Gas Flowmeter for Laboratory Room

Wet Gas Flowmeter for Laboratory Room

Accuracy: >±1%
Main Application: Nature Gas, Corrosive Liquid/Gas
Size: DN50-100
Sensor: Plug-in
Application: Energy Metering
Measuring Media: Gas
Customization:
Diamond Member Since 2009

Suppliers with verified business licenses

Trading Company

Basic Info.

Model NO.
cx
Measurement Object
Closed Pipeline
Certification
CE, ISO
Warranty
One Year
Certificate
ISO and CE
Installation
Easy
Price
Competitive
Maintenance
Less and Easy
Transport Package
Carton
Specification
CE SGS
Trademark
GN
Origin
Shanghai
HS Code
9026100000
Production Capacity
1000PCS/Month

Product Description

Wet Gas Flowmeter for Laboratory Room


Wet Gas Flowmeter for Laboratory Room
Main performances
Name and unit
Name and unit Model
XML-1 XML-2
Drum capacity(m3) 0.002(2L) 0.005(5L)
Rated flow(m3/h) 0.2(200L) 0.5(500L)
Top flow (m3) 100 100
Excess flow(m3/h) 0.3(300L) 0.75(750L)
Min. scale value(m3) 0.8×10-5 0.2×10-4
Normal pressure (Pa) 1000 1000
Accuracy in rated flow (%) ±1 ±1
Pressure in rated flow( Pa≤) 80 80
Outline dimensions(L/W/H) 490×264×220 mm 490×264×304 mm
Net weight(Kg) 4.5 5.4

Measuring medium
XML type is normal-type, it adopts brass material, and generally used in the scope of non-corrosive gases.
XMF type is anticorrosive-type, it adopts stainless steel material, can measure corrosive gases.

Usage
1. Put the meter on the worktable, adjust screws to enable blister of leveler in the centre, and maintain for a long time in use.
2. Open sealed screw cap of water level controller, pull out internal wool rope.
3. In the plug jack of thermometer or manometer, inject distilled water into the meter, when redundant distilled water drain from hole of water level controller ( sometimes it is clean when outflow one drop), then put wool rope in sealed screw cap of water level controller, and fasten the sealed screw cap.
4. Install thermometer and manometer, (every case 10Pa)
5. Connect air channel according to direction of gas outlet and intake, and sealled.
6. Open gas valve, and then you can measure gas.

Attentions while using
1. When you use it, you must always pay attention to the water level in the meter, otherwise it will affect measuring accuracy.
2. When you use it, temperature should be maintained at 15 ~ 25 ºC, and the temperature is the same as room temperature, its temperature difference should be ≤ 2 ºC.
3. You'd better readout in a few weeks after the operation of the meter.
4. When pressure of measuring gas is go beyond normal pressure 1 ~ 6 times (1 ~ 6 KPa), the meters can still work, at this time manometer should be removed , then use rubber plug plugs up mounting holes of manometer.
5. When flow of measuring gas is go beyond rated flow, the meters can still work, but measuring accuracy will be greatly decreased.
7. The meter should not be installed in a cold room, for fear that it will freeze inside.
8. In normal circumstances, check out accuracy every year at least.

Accessories
1 pc of thermometer
1 pc of manometer
2 rubber plugs

Production flow:
Wet Gas Flowmeter for Laboratory Room
Installation:
Wet Gas Flowmeter for Laboratory Room

(C)company show
Wet Gas Flowmeter for Laboratory Room

 

Send your message to this supplier

*From:
*To:
avatar Ms. Agnes Peng
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Diamond Member Since 2009

Suppliers with verified business licenses

Trading Company
Number of Employees
16
Management System Certification
ISO9001:2015