Digital LPG Gas Flowmeter DC24V Liquid Methane Butane Compressed Air Nitrogen Oxygen Argon Natural Gas Steam Gas Vortex Flow Meter

Product Description

Vortex gas flowmeter can measure various gases, including but not limited to the following types:

Fuel gases: coal gas, natural gas, liquefied petroleum gas
Industrial gases: air, nitrogen, oxygen, argon, compressed air
Chemical gases: hydrogen peroxide, chlorine gas, phosgene, hydrogen sulfide, sulfur dioxide, ammonia gas
Hydrocarbon gases: methane, butane, acetylene
Special gases: flue gas, biogas, carbon dioxide
Other volatile organic compounds such as toluene, benzene, xylene, etc
The vortex flowmeter is designed based on the Karman vortex principle and is suitable for measuring the volume flow rate and mass flow rate of superheated steam, saturated steam, and various general gases. This flowmeter, due to its unique structure and material selection, has good medium adaptability and can directly measure the volumetric flow rate of steam, air, gas, water, and liquid without temperature and pressure compensation. Equipped with temperature and pressure sensors, it can measure the volumetric flow rate and mass flow rate under standard conditions, making it an ideal alternative to throttling flow meters

A.[Features of Vortex Flow Meter]

Various medium of Vortex Flow Meter

The flow meter could test liquid,gas and steam.

Professional flow meter for steam

Beacuse of the high temperature,the Stainless Steel And Longer Warranty Period cng mass Flowmeter Vortex Flow Meter with temperature and pressyre consumption.The highest temperature is 250ºC

Various power supply for you reference

The power supply is 12~24VDC and battery supply,but the battery flow meter can not provide any output;

Widely flow range and large flow ratio

The diameter is from DN15 to DN1000 (DN200~1000 insert type)

Srable signal and performance

Achieve vibration immunity with a mass balanced sensor and Adaptive Digital Signal Processing with visual filtering.

B.[Parameter]

Production Name	Stainless Steel And Longer Warranty Period cng mass Flowmeter Vortex Flow Meter
Diameter	15,20,25,32,40,50,65,80,100,150,250,300,(300~1000)
Pressure	DN15~DN200(4.0Mpa)   DN250~DN300(1.6Mpa)
Temperature	Piezoelectric:-40~60ºC    Capacitive:-40~300ºC
Material	Stainless steel material
Vibration   acceleration	Piezoelectric:0.2g    Capacitive:1.0~2.0g
Accuracy	1.0%FS;1.5%FS; Insert type:2.5%FS
Flow ratio	1:6~1:30
Power supply	Flow sensor:12VDC/24VDC ;Transmitter:12 24 VDC  Battery:3.6V
Output	Pulse or 4~20mA Output ;battery supply can not provide any output
Pressure loss	Standard:Cd≤2.4
Explosion	Exd2 CT2T~5T GE or Exd2 CT2~CT5
Protection	IP65 or IP68
Medium	Gas;liquid or steam
Distance	Three wires pulse output≤3000mm;Two wires current output(4~20mA)

C.[Installation]

    1.Requirement of Environment

• Avoid the Electrical equipment,high frequency equipment,pls keep supply away other power supply. 
• Avoid the high temperature emvironment,If can't,pls take Insulated and ventilated measures. 
• Avoid the high temperature and corrosive gas. 
• Pls installa the Stainless Steel And Longer Warranty Period cng mass Flowmeter Vortex Flow Meter on the pipe without any shock.
• The Stainless Steel And Longer Warranty Period cng mass Flowmeter Vortex Flow Meter should be installaed indoor,if installa at oudoor,pls notice the water.
• Pls ensure the Plenty of space to checking and service.

   2.Requirement of pipeline 

• Pls confirm the requirement of straight pipe front and behind the Stainless Steel And Longer Warranty Period cng mass Flowmeter Vortex Flow Meter to avoid effecting the  error and performance

Note:

• The adjusted value can not installa at upsteam,should installa it at 10DN downsteam ;
• The pipe of uposteam and downsteam must have same diameter,
• The gasket between of flow meter and flange,The inside diameter should big than inside diameter of flowmeter 1~2mm.
• If you need installa the temperature and pressure sensor,the hole of temperature at 3~5DN,The hole of pressure at 6~8DN;
• The Stainless Steel And Longer Warranty Period cng mass Flowmeter Vortex Flow Meter could installa at horizontal ,vertical and tilt state;
• For gas,installa at vertical pipe,the flow direction Unrestricted,if the pipe with little liquid,the flow should from bottom to up.

Product Show

FAQ

 Q1. Sample Policy 

A1: Sample available if we have products in stock, but the customers have to pay the sample cost and the courier cost. We can reduce sample cost from further order according to your quantity.

Q2. Terms of Packing 

A: We can pack as you want,like color box,5-layer brown box.

Q3. Terms of Payment 

A: T/T (50% as deposit, and 50% before shipping), Made In China Trade assurance (same safe as Paypal).Pictures of the products and packages will be showed to you before shipping. 

Q4. Terms of Delivery 

A: EXW, FOB, CFR, CIF, DDP, DDU.

Q5. Delivery time 

A: Generally, it will take 10 to 50 days after receiving payment. The specific delivery time depends on the items and the quantity of your order.

Q6. OEM&ODM Service 

A: ODM&OEM service accepted, including selections on size, materials, design, packing method, etc., according to your requirements. Logo and brand customization also are available. 

Q7. Quality under Control 

A: We have 100% test before delivery.