Cx-Hl0100 Chemical Constant Flow Pump Laboratory Sampling Pump Peristaltic Pump

• Customization: Available
• After-sales Service: Online After-Sales Service
• Warranty: 1year
• Model NO.: CX-HL0010
• Protection Grade: IP54
• Voltage: 240v
• Impeller Number: Multistage
• Impeller Structure: Enclosed
• Pump Shaft Position: Horizontal
• Type: Flow Type
• Product Name: High Pressure Constant Flow Pump
• Set Step Size: 0.001ml/Min
• Flow Rate Range: 0-3000ml/Min
• Maximum: 42MP
• Size: 368*260*140mm
• Transport Package: Carton Box Safe Packing
• Specification: On demand supply
• Trademark: GN
• Origin: Shanghai
• HS Code: 9026100000
• Production Capacity: 1000PCS/Month
• Package Size: 40.00cm * 40.00cm * 30.00cm
• Package Gross Weight: 16.000kg
• Lead Time: 10 days (1 - 50 Pieces) ; To be negotiated ( > 50 Pieces)

Product Description

Product Description

CX-HL series high-pressure infusion pump is a high-precision, low-pulsation high-pressure infusion pump, which can achieve large flow and stable solvent delivery. The flow rate of liquid delivery can range from 0.001mL/min to 3000mL/min.
As an infusion system, in the process of sample purification, it can be used as a solvent delivery pump to provide stable mobile phase delivery for the purification process. In addition, it can also be used as an injection pump for the injection of large-volume samples during the preparation process to provide accurate injection volume.
CX-HL0100 Chemical Constant Flow Pump Laboratory Sampling Pump Peristaltic Pump

model	CX-HL0010	CX-HL0050		CX-HL0100	CX-HL0200	CX-HL0500	CX-HL1000	CX-HL3000
Set step size	0.001ml/min			0.01ml/min				0.1ml/min
Infusion mode	Double plunger in series			Double plunger in parallel
Flow rate range mL/min	0~10.000	0~50.000		0~100.00	0~200.00	0~500.00	0~1000.00	0~2999.9
maximum	42Mp	30Mpa		20MPa		15MPa		10MPa
Work pressure	0.1%			0.2%		0.3%
Reproducible RSD	±0.15%			±0.5%				±1%
(stability)	Independent mode, set parameters through the panel buttons Serial port mode, through RS232 communication, controlled by PC Network port mode, communication via network cable, controlled by PC
display	5.0 Inch Touch Screen					5.6 Inch Touch Screen
Size(L*W*H)	368*260*140					488*380*215		610*460*275
Power	75W		150W			750W	1000W	1500W
Weight	6.9kg		8.5kg			27.2kg	27.2kg	73kg

Its main features are as follows:

• Double plunger series mode, floating plunger design;
• Advanced pump drive system makes the pump performance better, higher precision, and better stability;
• Adopt electronic pulsation compensation technology, multi-point flow correction, to ensure flow accuracy in the full flow range, more accurate flow rate, more stable performance, reliable operation, and high cost performance
• Open computer anti-control communication protocol, convenient for third-party software control;
• Touch screen design;
• Humanized interface design;
• Flow multi-point calibration;
• The firmware program can be updated online;
• Power-off protection;
• LAN connection, stable data transmission;
• The instrument can alarm in time and automatically stop the operation of the pump according to the set procedure.

 

Product Show

√The power supply is a 90V~240V wide voltage input switching power supply, which supplies power to the cooling system, stepper motor driver, control system and other devices.
√The control system is the core part of the CX-HL series of high-pressure infusion pumps. It allows users to set the flow rate according to their needs, select the working mode of the pump, write time programs and GLP event records, etc.
√The pressure measurement system can measure the size of the liquid pressure in the liquid path, and the user can select different chromatographic columns and mobile phases according to this value; by setting the maximum pressure and minimum pressure, the high-pressure infusion pump can be in the best working state and avoid Occurrence of overpressure and leakage.
√The stepper motor driver and stepper motor are high-voltage power devices, which ensure that the liquid in the liquid path can smoothly flow through the chromatographic column and the flow cell, so that the infusion work can proceed smoothly.
√The pump housing unit part mainly includes pump head assembly, one-way valve assembly, cam mechanism and so on.
According to different infusion volume, CX-HL series infusion pump can be divided into the following seven types:

Pump Head	Flow rate range	Maximum working pressure	Material
10mL	(0.001~10.000)mL/min	42MPa	316LSS
50mL	(0.001~50.000)mL/min	30MPa	316LSS
100ml	(0. 01~100.00)mL/min	20 MPa	316LSS
200ml	(0. 01~200.00)mL/min	20 MPa	316LSS
500ml	(0. 01~500.00)mL/min	15 MPa	316LSS
1000ml	(0. 01~1000)mL/min	15 MPa	316LSS
3000ml	(0. 1~3000.0)mL/min	10 MPa	316LSS